| NXP LPC1758 Starter Kit contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: |
- NXP LPC1758 ARM Cortex-M3 Board
- Keil MDK-ARM Development Kit, 32K evaluation edition
- Emlink for ARM - a high speed JTAG Emulator for ARM Cortex-M3 processors
- Plenty of example programs, all in source code
|
| |
| NXP LPC1758 ARM Cortex-M3 Board: |
- Include one 2.4" TFT LCD (240*320)
- NXP LPC1758 processor, based on ARM Cortex-M3 Core, 100MHz
- 512KB internal flash and 64KB SRAM
- XTAL Frequency: 12 MHz
- Two RS232 Interfaces
- Two CAN Interfaces
- One 10/100M Ethernet Interface
- One ETM Interface
- One Micro SD Card Interface
- One USB Device Interface
- One USB Host Interface
- One USB OTG Interface
- One 20pins JTAG Interface
- One 10pins Cortex Debug Interface
- One 18pins Cortex Debug Interface
- One TFT LCD Interface
- One Joystick with 4-direction control and selector
- One Analog Output (connected to speaker by default)
- One Analog Input (connected to potentiometer by default)
- Supply Voltage: 5V DC (provided by the USB bus of a PC)
- Supply Current: 65mA typical, 120mA maximum
- Board Size: 119mm x 119mm (4.68" x 4.68")
Click here to find more information about this NXP LPC1758 Cortex-M3 Board.
|
| |
| Keil MDK-ARM Development Kit |
- uVision IDE, debugger and simulation environment
- ARM industry-leading C/C++ compiler from ARM
- MicroLib highly optimized run-time library
- Real-Time Trace for Cortex-M3 processor based devices
- Keil RTX - deterministic Real-Time Operating System
More information about Keil MDK-ARM could be found in Keil website: http://www.keil.com.
|
| |
| Emlink for ARM |
- Supports debugging with Realview MDK and EWARM
- Supports ARM Cortex-M3 processors: STM32, LPC17XX, AT91SAM3UE, etc.
- JTAG 20 pins connects to target
- Supports hardware and software breakpoints
- Supports USB port connecting to host PC
- Downloads and debugs speed up to 250KBytes/s (about 1.5Mbps)
- Integrates seamlessly into IAR Embedded Workbench and Keil RealView MDK
Click here to find more information about this JTAG Emulator.
|
| |
| Plenty of example programs |
| Embest provides plenty of software examples for this NXP LPC1758 Cortex-M3 board, all in source code. These software examples can be debugged under the popular Keil MDK (Microcontroller Development Kit) environments, making practical use of the board's peripherals. |
| Example Programs | Example Programs | | GPIO Test | Mass_Storage Test | | NVIC Test | LCD_Blinky Test | | EXTI Test | Serial Interface Test | | ADC Test | USB Test | | SRAM Test | TIM Test | | SPI Test | CAN Test | | PWM Test | Micro SD Test | | RIT Test | Debug Emulation Test | | Ethernet Test | LCD Test | | Joystick Test | uC/OS-II transplantion Test | | DAC Speaker Test | Blinky Test |
|
SAM9260V1 Single Board Computer
