IES


Welcome to IES!

My Cart

You have no items in your shopping cart.

 

Recently Viewed Products

  1. NXP LPC1114 Starter Kit
  2. NXP LPC2478 ARM7S Board
  3. ATMEL ATSAM3U ARM-CM3 Board
  4. Emlink for ARM
  5. NXP LPC1768 Starter Kit
 

Compare Products - 42 Items

  1. Remove This Item SAM9260V1 Single Board Computer
  2. Remove This Item SAM6300i Single Board Computer
  3. Remove This Item SBC6020 Single Board Computer
  4. Remove This Item SAM9315V1 Single Board Computer
  5. Remove This Item Devkit2442-I
  6. Remove This Item SBC2410-III Single Board Computer
  7. Remove This Item SBC2410-I Single Board Computer
  8. Remove This Item EM104V1 PC/104 Single Board Computer
  9. Remove This Item Mini8100 Processor Card
  10. Remove This Item Mini6300 Processor Card
  11. Remove This Item Mini9261-I Processor Card
  12. Remove This Item Mini2440-I Processor Card
  13. Remove This Item Mini2410-III Processor Card
  14. Remove This Item Mini2410-II Processor Card
  15. Remove This Item Mini2410-I Processor Card
  16. Remove This Item Mini3250 Processor Card
  17. Remove This Item TDS560 USB-Plus Jtag Emulator
  18. Remove This Item XDS100v2 USB JTAG Emulator
  19. Remove This Item OMAP3530 Video Solution-VSS3530
  20. Remove This Item VSS35 Network Video Server
  21. Remove This Item Mini35 Network Video Module
  22. Remove This Item PCI Express Cable Extender
  23. Remove This Item PCI Express Expansion Backplane
  24. Remove This Item PCI Expansion Backplane
  25. Remove This Item PCI to PCI Express Adapter
  26. Remove This Item In-Circuit Programmer/Loader (Easy Loader)
  27. Remove This Item PCI Express Extender
  28. Remove This Item PCI to PCI Mezzanine Card (PMC) Adapter
  29. Remove This Item 32-bit PCI Bus Extender
  30. Remove This Item Universal Byte Blaster
  31. Remove This Item ATMEL SAM9G45 ARM9 Board
  32. Remove This Item ATMEL MBC-SAM9G45 Core Board
  33. Remove This Item ATMEL MBC-SAM9G20 Core Board
  34. Remove This Item STM32F107 ARM-CM3 Board
  35. Remove This Item STM32F103ZE ARM-CM3 Board
  36. Remove This Item NXP LPC1758 Starter Kit
  37. Remove This Item NXP LPC1768 Starter Kit
  38. Remove This Item Emlink for ARM
  39. Remove This Item ATMEL ATSAM3U ARM-CM3 Board
  40. Remove This Item NXP LPC2478 ARM7S Board
  41. Remove This Item NXP LPC1114 Starter Kit
  42. Remove This Item NXP LPC1343 Starter Kit
Clear All Items
 
    • Product NXP LPC1343 Starter Kit successfully added to compare list
    • Product NXP LPC1343 Starter Kit successfully added to compare list

NXP LPC1343 Starter Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

NXP LPC1343 Starter Kit

Be the first to review this product

$ 30.00

Availability: In stock

Add Items to Cart
OR

For Volume Discount Pricing Contact Customer Service at customerservice@iesdistribution.com

Quick Overview

The LPC1343 Starter Kit is a brand new, cost-effective but high-performance evaluation tool of the ARM Cortex-M3 based LPC13xx controller family from NXP, allowing you to create and test working programs for this advanced architecture. The kit works at up to 72MHz, and integrates a NXP LPC1343 Evaluation Board and a smart USB JTAG Debugger which makes you don't need to buy another JTAG Emulator for development. In addition, the plenty of software examples accompanied with the kit will be convenient for you to evaluate the functions of the NXP LPC1343 processor and ease your development.
  • Integrates a NXP LPC1343 Target Board and A smart JTAG Debugger for nxp lpc1300.
  • NXP LPC1343 ARM 32-bit Cortex(TM)-M3 CPU, up to 72 MHz
  • Extremely cheap, only US$30

Product Description

Related documentations
Documentations Size Download
NXP LPC1343 Starter Kit User Manual 0.97 MB
NXP LPC1343 Starter Kit Schematic 67.5 KB
NXP LPC1343 MCU Datasheet 325 KB
Block Diagram of LPC1343 Kit
 
NXP LPC1343 Target Board Features
  • LPC13xx ARM 32-bit Cortex-M3 CPU, 72 MHz maximum frequency
  • 8 LED light tube, a power supply LED
  • A mini-type USB socket, just power supply
  • A BOOT button
  • A RESET button
  • SSP interface An RS232 connection socket (DB9) (support RS-485/EIA-485)
  • I2C interface
  • I2C interface connects to external EEPROM
  • 10-bit ADC Module
  • A JTAG/SWD debug interface
  • Power Supply: USB powered
 
USB JTAG Debugger Features
  • Support LPC1300 Series currently (also support Cortex-M0 MCUs)
  • Support SW/JTAG debug and Download
  • Download speed up to 110KB/s
  • Flexible debugging socket, support 20/10/8 pins connector
  • Support Keil MDK and CooCox full series software
 
LPC1343 Target Board Software Resources

Examples

Descriptions

BlinkyUse 16-bits timer to achieve LED1 blinky.
GPIOUse GPIO port to achieve input event interrupt. GPIO ports set as input event,single edge trigger, active high.
PMUConfigure PMU to put some of the peripheral in sleep mode.
SSPSSP LOOPBACK mode test.
SysTickConfigure the SysTick to generate a time base equal to 1 ms. According systick delay to achieve LED toggle.
Timer32Use 32-bits timer to achieve LED1 blinky delay.
UARTUse UART to send and receive data through HyperTerminal.
WDTWatchDog application example.
I2C_EEPROMI2C EEPROM Read/write test
Temperature SensorI2C Temperature sensor test
 
Applications for NXP LPC1300 MCU
  • eMetering
  • Lighting
  • Industrial networking
  • Alarm systems
  • White goods
Resource

The NXP LPC1300 series is based on the Cortex-M3 Rev2 core and is designed for embedded 16 and 32-bit applications. The new MCUs operate at 70MHz and consume about 200 ?A per MHz.
 
LPC1300 Microcontrollers Features
  • ARM Cortex-M3 processor running at up to 70MHz
  • Up to 32KB flash, up to 8KB SRAM
  • USB 2.0 full-speed device controller with on-chip PHY (LPC134x)
  • 8-channel 10-bit ADC
  • UART, SPI controller, I2C-bus interface
  • Up to 42 GPIO pins
  • 4 timers plus programmable WDT with lockout feature
  • Integrated power management with deep-sleep modes
  • Integrated clock generation
The new LPC1311/13/42/43 microcontrollers feature up to 32kB of flash memory, 8kB of SRAM memory, low-cost USB, up to 42 general purpose I/O pins, and built-in Nested Vectored Interrupt Controller (NVIC). The LPC1300 enables in-system programming and in-application programming via on-chip bootloader software and offer a range of serial interfaces including high speed USB 2.0 with on-chip PHY, UART, SSP/SPI controller, and I2C-bus interface. For ease of use, USB Mass Storage and HID class drivers are included on-chip enabling USB communication to be set up in minutes. These drivers are incorporated in ROM, leaving 100% of the user Flash space for the application.
 
LPC1300 Selection Guide
More Info: The NXP LPC1300 series Microcontrollers
PACKING LIST
NO NAME / TYPE QTY DESCRIPTION
1 NXP LPC1343 Starter Kit 1 Include a target board and a JTAG Debugger
2 DB9 to IDC10 Pins Cable 1 Connect the debug interface of lpc1343 target board to the COM interface of the PC
3 Mini USB Cable 1 USB-A(M) to Mini-B(M;5pins)
4 CD-ROM 1 Including the user manual, datasheets, software, shematics, etc.
Total weight of each standard package (lb.): 1.0 lb.

Additional Information

Model P13L
Newsletter

© 2010 Intelligent Embedded Solutions. All Rights Reserved.