IES


Welcome to IES!

  • Home  
  • ATMEL ATSAM3U Starter Kit

My Cart

You have no items in your shopping cart.

 

Recently Viewed Products

  1. ATMEL ATSAM3U ARM-CM3 Board
  2. 32-bit PCI Bus Extender
 

Compare Products

You have no items to compare.

 

ATMEL ATSAM3U Starter Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

ATMEL ATSAM3U Starter Kit

Be the first to review this product

$ 249.00

Availability: In stock

Add Items to Cart
OR

For Volume Discount Pricing Contact Customer Service at customerservice@iesdistribution.com

Quick Overview

This is the low cost development kit for ATSAM3U (96MHz, the ARM Cortex-M3 processor built-in High Speed USB controller), including the ATSAM3U evaluation board(AT3U) and Emlink for ARM(EAH1) JTAG adapter, so the developers can easy start to learn and test all the relevant applications on it, or evaluate your new project design through this entire system.

Product Description

Related documentations
Documentations Size Download
ATMEL SAM3U Eval Board User Manual 304 KB
ATMEL SAM3U Eval Board Schematic 158 KB
ATMEL AT91SAM3U Datasheet 1.36 MB
Emlink for ARM JTAG Emulator User Manual 289 KB
ATMEL SAM3U Eval Board Dimension 112 KB
ATMEL ATSAM3U Starter Kit contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:
  • Atmel ATSAM3U ARM Cortex-M3 Board
  • Keil MDK-ARM Development Kit, 32K evaluation edition
  • Emlink for ARM - a high speed JTAG Emulator for ARM Cortex-M3 processors
  • Plenty of example programs, all in source code
 
Atmel ATSAM3U ARM Cortex-M3 Board:
  • One ATSAM3U Board plus one 2.4" TFT LCD
  • ATSAM3U4E LQFP 144 Pins, ARM Cortex-M3 based, 96MHz
  • XTAL Frequency: 12 MHz
  • 256KB flash memory and 48KB SRAM
  • Two RS232 Interfaces
  • One High-speed USB Device Interface
  • One 2.4" TFT LCD interface
  • One MicroSD Card interface
  • One 20pins JTAG Interface,
  • Four Push Buttons (Reset, Wake Up, Tampering, User)
  • Two BNC Interfaces
  • One RTC Unit with Battery
  • One Analog Input (connected to potentiometer),
  • One Analog Output (connected to speaker by default)
  • Supply Voltage: 5 Volts DC (provided by power adapter)
  • Board Size: 135mm x 90mm (5.3" x 3.5")
    Click here to find more information about this Atmel ATSAM3U Cortex-M3 Board.
 
Keil MDK-ARM Development Kit
  • ?Vision IDE, debugger and simulation environment
  • ARM industry-leading C/C++ compiler from ARM
  • MicroLib highly optimized run-time library
  • Real-Time Trace for Cortex-M3 processor based devices
  • Keil RTX - deterministic Real-Time Operating System
    More information about Keil MDK-ARM could be found in Keil website: http://www.keil.com.
 
Emlink for ARM
  • Supports debugging with Realview MDK and EWARM
  • Supports ARM Cortex-M3 processors: STM32, LPC17XX, AT91SAM3UE, etc.
  • JTAG 20 pins connects to target
  • Supports hardware and software breakpoints
  • Supports USB port connecting to host PC
  • Downloads and debugs speed up to 250KBytes/s (about 1.5Mbps)
  • Integrates seamlessly into IAR Embedded Workbench and Keil RealView MDK
    Click here to find more information about this JTAG Emulator.
 
Plenty of example programs
Embest Provides plenty of software examples for this evaluation board, all in source code. These software examples can be debugged under the popular Keil MDK (Microcontroller Development Kit) environments, making practical use of the board's peripherals.
Example ProgramsExample Programs
NVIC TestDMA Test
PDC TestUSART Test
PWR TestGPBR Test
RTT TestRTC Test
WDT TestPWM Test
ADC TestEEFC Test
NandFlash TestSRAM Test
TIM TestHSMCI Test
SSC TestSPI Test
Touch Screen TestLCD Test
UDPHS TestUSB_CDC Test
RTX_Traffic Test 
About ATMEL

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.
ATMEL AT91SAM 32-bit ARM-based Microcontrollers
Atmel's AT91SAM 32-bit ARM Flash MCUs and Embedded MPUs are designed for system control, wired & wireless connectivity, user interface management, low power and ease of use. They have received wide acceptance in markets like POS terminals, security, building automation, industrial control, medical, white goods, PC and gaming peripherals, toys and cellular phone accessories. A comprehensive and high-quality eco-system provides access to development tools, Flash programming, software and worldwide technical support.
Atmel has a proven track record as a market leading ARM MCU and MPU vendor, a developer of high bandwidth architectures, an innovator of low power microcontrollers and a facilitator of software portability.
  • The broadest software compatible ARM MCU & Embedded MPU portfolio
  • Optimal peripheral mix, memory footprint, low power and performance
  • Only supplier with 200+ MIPS 32-bit Flash MCU (SAM9XE)
  • Highest SRAM integration (SAM7X512, SAM9261)
  • Lowest power standby modes on 32-bit MCU (SAM7L)
  • Tightly integrated development suites and software packages
  • Software reuse between different members of the family
  • Highest bandwidth architectures allowing selection of lower cost MCU range
  • Local commercial and technical experts
    		•
    ATMEL Cortex-M3 Products
    Product line: AT91SAM ---------- Product family: SAM3
    Product Series: SAM3U ---------- Product : SAM3U4E, SAM3U4C, SAM3U2E etc.
    ATMEL named the microcontroller with Cortex-M3 core as SAM3U Series: 96 MHz Cortex M3 Flash MCU with High-Speed USB.
    ATMEL Cortex-M3 Product List
    Device Flash
    (Kbytes)    		 SRAM
    (Kbytes)    		 PIOs MMC
    Data
    Bus
    (bits)    		 USARTs SPI TWI FWUP,
    SHDN
    Pins    		 External
    Bus
    Interface    		 ADC Package
    SAM3U4E 2 x 128 52 96 8 4 5 2 Yes 8 or 16 bits,
    4 chip selects,
    24-bit address    		 8-ch 12-bit
    8-ch 10-bit    		 LQFP144
    BGA144
    SAM3U2E 128 36 96 8 4 5 2 Yes 8 or 16 bits,
    4 chip selects,
    24-bit address    		 8-ch 12-bit
    8-ch 10-bit    		 LQFP144
    BGA144
    SAM3U1E 64 20 96 8 4 5 2 Yes 8 or 16 bits,
    4 chip selects,
    24-bit address    		 8-ch 12-bit
    8-ch 10-bit    		 LQFP144
    BGA144
    SAM3U4C 2 x 128 52 57 4 3 4 1 No 8 bits,
    2 chip selects,
    8-bit address    		 4-ch 12-bit
    4-ch 10-bit    		 LQFP100
    BGA100
    SAM3U2C 128 36 57 4 3 4 1 No 8 bits,
    2 chip selects,
    8-bit address    		 4-ch 12-bit
    4-ch 10-bit    		 LQFP100
    BGA100
    SAM3U1C 64 20 57 4 3 4 1 No 8 bits,
    2 chip selects,
    8-bit address    		 4-ch 12-bit
    4-ch 10-bit    		 LQFP100
    BGA100
    ATSAM3U Features
    Atmel's SAM3U series is the world's first 32-bit ARM Cortex M3 Flash microcontroller with high-speed 480 Mbps USB + Phy.
    High-Speed USB: The SAM3U is the first Cortex M3 microcontroller with high-speed USB and an integrated transceiver for fast up/downloading of data, robust EMI tolerance, and plug-and-play high-speed serial interconnectivity.
    High Performance: Features a 96 MHz maximum operating frequency and a high data-bandwidth architecture based on a 5-layer bus matrix with 22 DMA channels and distributed memory
    Dual-Bank Flash: Provides safe in-application programming (IAP) including the boot program
    1.62 to 3.6V Operation: True 1.8V 10% operation extends device operation when running from two AA alkaline batteries
    Memory Protection Unit: Improves code protection and secures multi-application/task execution
    High-End Analog: Features a differential input and programmable gain amplifier (PGA) on a 12-bit 1 Msps ADC
    ATSAM3U Block Diagram:
    Relevant Documentation Description Link & Attribute
    Cortex-M3 selection guide Product selection guide to Atmel's ATSAM microcontrollers that give immediate access to market-leading ARM processors 601KB
    Cortex-M3 product list ATMEL Cortex-M3 products and their features 2KB
    SAM3U Series Preliminary Summary 57 pages, revision AS, updated 5/09 1.36MB
    Leaflet of ATMEL Cortex-M3 96 MHz Cortex-M3 based microcontrollers, Flash MCU with High-Speed USB
    PACKING LIST
    NO NAME / TYPE QTY DESCRIPTION
    1 Atmel ATSAM3U ARM Cortex-M3 Board 1 One AT91SAM3U ARM Cortex-M3 Board
    One RS-232 Serial Cable
    One USB Cable
    One 2.4" TFT LCD Panel (240 x 320)
    2 Emlink for ARM 1 One Emlink for ARM
    One JTAG20-14-8 Convert Module
    One IDC14 Cable
    One 8pins Cable
    Total weight of each standard package (kg): 1.9kg
    OPTIONAL
    # NAME / TYPE QTY DESCRIPTION
    1 CDROM of Atmel ATSAM3U Starter Kit (free) 1 01-Documents -- user manual, data sheets and the other development documents.
    02-Images -- image files for this product.
    03-Software -- software programs for this product.
    04-Tools -- the utilities tools and software
    CDROM

    Additional Information

    Model AT3L
    Newsletter

    © 2010 Intelligent Embedded Solutions. All Rights Reserved.